TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 828 of 1205

TM 9-2320-387-24-l

4-6 1. DIRECTIONAL SIGNAL FLASHER REPLACEMENT

This task covers:

a. Removal

b. Installation

1

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Sealing compound (Appendix C, Item 64)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Battery ground cables disconnected (para. 4-68).

Maintenance Level

Unit

NOTE

The

flasher is located under the instrument panel to the left of the steering column.

vj

1.

Disconnect cannon plug (8) from main light switch (71.

2.

Disconnect connector plug (6) from flasher (5).

3.

Remove two nuts (41, washers (31, screws (11, and flasher (5) from cowl (2).

-1

Install flasher (5) on cowl (2) with two screws (11, washers (31, and nuts (4).

Apply sealing compound to threads of connector plug (6) and connect connector plug (6)

to

flasher

FOLLOW-ON TASKS:

l

Connect battery ground cables (para. 4-68).

l

Check directional signal flasher for proper operation (TM 9-2320-387-10).

4-102