TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 830 of 1205

TM9-2320-387-24-l

1 4-63. DIRECTIONAL SIGNAL CONTROL REPLACEMENT

I

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

TOOIS

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment

Condition

Battery ground cables disconnected

(para. 468).

Maintenance Level

Unit

1

a. Removal

]

1.

Loosen connector nut (6) and remove connector plug (7) from directional signal control (41.

2.

Remove four screws (21 and directional signal control (4) from bracket (1).

rYxz&-l

1.

Place lever (5) to HAZARD position.

2.

Install directional signal control (4) on bracket (1) with four screws (2). Do not tighten screws (2).

3.

Rotate steering wheel, ensuring gauge post (3) mates with directional signal control (41, and

tighten screws (2) to 22-26 (30-35 N-ml.

4.

Install connector plug (7) on directional signal control (4) and tighten connector nut (6).

FOLLOW-ON TASKS:

l

Connect battery ground cables (para. 4-68).

.

Check directional signal control for proper operation (TM 9-2320-387-10X

4-104