TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 846 of 1205

TM

9-2320-387-24-l

4-70. 12-VOLT REGULATOR CABLE REPLACEMENT

(Cont’d)

piTzizq

1.

Position cable (4) in approximate mounting location on stud (6) and through hole in battery box (24).

2.

Install cable (19), lead (18), and cable (4) on terminal clamp (21) with screw (17) and nut (20).

3,

Fill battery terminal boot (22) with lubricating oil.

4.

Install cap (23) on terminal boot (22).

5.

Install cable (4) and clamp (13) on bracket (14) with washer (12), screw (ll), lockwasher (16), and

nut (15).

6.

Install clamp (9) and cable (4) on stud (6) with lockwasher (8) and nut (7).

7.

Install cable (4) on regulator (5) with washer (2) and nut (1). Tighten nut (1) to 18-22 lb-in.

(2.0-2.5 N-m). Slide rubber boot (3) over nut (1).

FOLLOW-ON TASKS:

l

Lower and secure hood (TM 9-2320-387-10).

l

Connect battery ground cables (para. 4-68).

l

Install engine access cover (para. 10-22).

4-120