TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 847 of 1205

TM 9-2320-387-24-l

4-71. BUSS BAR REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Seven lockwashers (Appendix G, Item 212)

Sealing compound (Appendix C, Item 64)

Manual References

TM 9-2320-387-24P

Equipment Condition

Batteries removed (para.

4-74).

Maintenance

Level

I

a.

Removal

I

1.

Remove five nuts (91, lockwashers (81, washers (71, engine harness cable (61, alternator

cable (111, battery cable (lo), umbilical power cable

(121,

and slave receptacle cable (13) from buss

bar (2). Discard lockwashers (8).

2.

Remove nut (51, lockwasher (41, washer (31, capscrew (141, washer (16), lockwasher (15) and buss

bar (2) from power feed-through stud (1) and battery box (17). Discard lo&washers (4) Ad (15).

1

b.

Installation

1

1.

Install buss bar (2) on battery box (17) and power feed-through stud (1) with lockwasher (15),

washer (161, capscrew (141, washer (3), lockwasher (4), and nut (5).

2.

Install engine harness cable (61, alternator cable (111, battery cable (101, umbilical power cable (121,

and slave receptacle cable (13) on buss bar (2) with five washers (71, lockwashers (81, and nuts (9).

3.

Apply sealing compound to buss bar (2), coating all exposed metallic surfaces.

-

FOLL

,OW-ON TASK: Install batteries (para. 4-74).

4-121