TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 856 of 1205

TM 9-2320-387-24-l

-75. BAnERY TRAY MAINTENANCE

I

This task covers:

a.

Removal

b.

Cleaning’and

Inspection

INITIAL SETUP:

c

Preventive

Modification

d.

Installation

Tools

?&era1

mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Manual

References

TM 9-6140-200-14

TM 9-2320-387-24P

Equipment

Condition

Batteries removed (para. 4-74).

Materials/Parts

Four locknuts (Appendix G, Item 109)

Sodium bicarbonate (Appendix C, Item 76)

Maintenance Level

Unit

a. Removal

Remove four locknuts (61, washers (2>, capscrews (11, washers

(21,

and battery tray (3) from battery box (5).

Discard locknuts (6).

b.

Cleaning and Inspection

NOTE

For additional information on battery box tray cleaning, refer to

TM 9-6140-200-14.

1.

Clean battery tray (3) with sodium bicarbonate solution.

2.

Inspect battery tray (3) for damage. Replace if damaged.

3.

Inspect battery cable protectors (4) and battery compartment seals (7) for damage. Replace if damaged.

c Preventive Modification

NOTE

l

The

following step will prevent water from accumulating in the

battery tray.

,-

;

l

Refer to hole diagram for location of holes.

Locate, mark, and drill four l/2-in. holes in battery tray (3).

d. Installation

Install

battery tray (3) on battery box (5) with four washers (2), capscrews (11,

washers (21, ad ~OC~XUS

03.

Tighten locknuts (6) to 6 lb-R (8 Nom).

4-130