TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 939 of 1205

TM9-2320-387-24-l

1 6-9. GEARED HUB REPLACEMENT (Cont’d)

I

10.

11.

12.

13.

14.

15.

16.

Install tie rod end (4) on geared hub (5) with washer (3) and slotted nut (2). Tighten slotted nut (2) to

70 lb-ft (95 N-m) and install cotter pin (1).

Connect vent line (6) to geared hub fitting (7) and tighten clamp (8).

Install vent line (6) and vent line bracket and clamp (11) on geared hub (51 with washer (10) and

capscrew (9). Tighten capscrew (9) to 38 lb-ft (52 Nom).

Tighten drainplug (14) to 8-13 lb-ft (11-18 N-m).

Remove fill plug (13) and washer (12) from geared hub (5).

Fill geared hub (5) to proper level (para 2-12).

Install washer (12) and fill plug (13) on geared hub (5). Tighten fill plug (13) to 8-13 lb-ft (11-18 Nom).

6-26