TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 963 of 1205

TM 9-2320-387-24-l

6-21. STABILIZER BAR LINK REPLACEMENT

1

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

hlaterials/Parts

Maintenance

Level

Unit

Locknut (Appendix G, Item

117)

Sealing compound (Appendix C, Item 63)

I

a. Removal 1

1.

Remove locknut (1) and two washers (2) from bar link (3) and stabilizer bar (4). Discard locknut (1).

2.

Remove capscrew (51, two washers (61, and bar link (3) from lower control arm (7).

b. Installation

1.

Apply sealing compound to threads of capscrew (5). InstaIl bar Iink (3) on lower control arm (7) with

two washers (6) and capscrew (5). Tighten capscrew (5) to 70 lb-R (95 Nom).

2.

Install bar link (3) on stabilizer bar (4) with two washers (2) and locknut (1). Tighten locknut

(1)

to

75

Ib-ft (102 Nom).

6-50