TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 1027 of 1555
TM
9-2320-387-24-2
I
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)
1
84.
85.
86.
87.
88.
89.
90.
Disconnect harness lead 400D (34) from heater motor (35).
Remove screw (38), washer (37), and harness ground lead 57E (36)
from
heater motor (35).
Remove two locknuts (331, capscrews (30), clamps (42), and harness (4) from A-beam (31).
Discard locknuts (33).
Disconnect harness connectors 27K (40), 57F (411, and 71C (39) from windshield wiper motor jumper
harness leads (32).
Remove
harness (4) from A-beam (31) and guide harness (4) into instrument panel area.
Remove left body mounts (para. 33-3).
Guide harness (4) out through hole in body (19) and remove harness (4) from vehicle.
27-2 1
Back to Top
