TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1174 of 1555

TM 9-2320-387-24-2

1 30-3.

DIFFERENTIAL

REPAIR

(cont’d)

I

3.

Remove locknut

(3), seal

washer (71, output flange (61, and output shaft seal (51 from output shaft (41.

Discard seal washer (71, output sh& seal (51, and locknut (31.

4.

Repeat steps 1 through 3 for opposite side.

5.

Install two axle holding furture adapters on housing (1) with four capscrews (101. Place housing (11

in holding stand.

6.

Position housing (1) so differential cover (8) faces up. Remove twelve capscrews (91 and cover (8)

from housing ( 1).

AxlElKxDlNG

I

FIXTURE

ADAm

AXLE HOLDING

FIXTURE ADAPTER

30-3