TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1181 of 1555

30-3. DIFFERENTIAL REPAIR (Cont’d)

NOTE

If rear pinion yoke is being replaced, a new slinger must be installed

on new pinion yoke. Ensure slinger is seated against rear shoulder of

yoke.

3.

Inspect splines and sealing surfaces on output flanges (1), pinion yoke (2), and two output

shafts (3) for damage. Replace if damaged.

4.

Inspect all bearings (4) and bearing cups (5) for damage. Replace bearings (4) and bearing cups (5)

in matched sets if either is damaged.

5.

Inspect differential case (6) for damage. Replace if damaged.

TM 9-2320-387-24-2

30-10

Change 1

1

2

3

4

5

6