TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 121 of 1555

TM 9-2320-387-24-2

10-58.2. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d)

10-98.6

Change 1

1.

Remove six locknuts (6), washers (2), capscrews (3), washers (2), two transmission support

brackets (4), and four rubber washers (5) from intermediate shield (1) and transmission mount

crossmember (7). Discard locknuts (6) and rubber washers (5).

2.

Remove locknut (8), washer (9), capscrew (10), and washer (9) from right support bracket (15) and

right side frame rail (16). Discard locknut (8).

3.

Remove locknut (22), washer (19), capscrew (18), and washer (19) from left support bracket (24),

engine mount bracket (17), and left side frame rail (23). Discard locknut (22).

4.

Remove four locknuts (14), washers (12), capscrews (11), washers (12), and right side support

bracket (15) from right side mounting bracket (13). Discard locknuts (14).

5.

Remove four locknuts (26), washers (21), capscrews (20), washers (21), and left side support

bracket (24) from left side mounting bracket (25). Discard locknuts (26).

6.

Remove two locknuts (29), washers (30), capscrews (31), washers (30), and intermediate shield (1)

from front crossmember (27) and front shield (28). Discard locknuts (29).

c. Intermediate Shield Removal