TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 127 of 1555

TM 9-2320-387-24-2

10-58.2. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d)

10-98.12

Change 1

1.

Install rear shield (14) on rear-front crossmember (9) with three spacers (12), washers (11),

capscrews (10), washers (11), and locknuts (13). Tighten locknuts (13) to 44 lb-ft (60 N

•

m).

2.

Install rear shield (14) on three mounting brackets (7) with three washers (6), capscrews (8),

washers (6), and locknuts (5). Do not tighten locknuts (5).

3.

Install three mounting brackets (7) on rear-rear crossmember (3) with six spacers (15), washers (2),

capscrews (1), washers (2), and locknuts (4). Tighten locknuts (4) to 24 lb-ft (33 N

•

m).

4.

Tighten three locknuts (5) to 24 lb-ft (33 N

•

m).

h. Rear Shield Installation

2

1

7

8

9

11

13

2

4

5

10

11

12

14

6

15

3

6