TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1337 of 1555

33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

33-108

Change 1

10.

Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded area of metal

strip F (1).

11.

Apply adhesive sealant to shaded area on right rear floor panel (2) and insert panel (3).

12.

Position metal strip F (1) on right rear floor panel (2) and insert panel (3), and install metal strip F (1)

on insert panel (3) with three rivets (6).

13.

Using metal strip F (1) as a template, locate, mark, and drill eleven 0.187-in. (4.75-mm) diameter

holes through right rear floor panel (2) and insert panel (3).

14.

Secure metal strip F (1) to right rear floor panel (2) and insert panel (3) with four rivets (4).

15.

Secure metal strip F (1) on insert panel (3) and right rear floor panel (2) with seven rivets (5).

16.

Spot-paint insert panel (3) and right rear floor panel (2). (Refer to TM 43-0139.)