TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 1328 of 1555
33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
Change 1
33-99
1.
Position metal strip C (6) with arrow facing up and toward right on insert panel (1). Align reference
lines (8) and insert panel edges (7).
2.
Using metal strip C (6) as a template, locate, mark, and drill nine 0.187-in. (4.75-mm) diameter
holes through insert panel (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (1) and metal strip C (6).
4.
Position metal strip C (6) on insert panel (1) and install with nine rivets (9).
5.
Remove any adhesive residue and clean edges of metal strip C (6) and insert panel (1).
g. Metal Strip C and Insert Panel Assembly
DRILL NINE 0.187-IN. (4.75-MM)
DIAMETER HOLES
Back to Top
