TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1322 of 1555

33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

Change 1

33-93

6.

Cut metal strip (5) from sheet metal, and mark center line (6) and directional arrow (10). Identify

metal strip (5) as E.

7.

Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip E (5).

8.

Cut two metal strips (7) from sheet metal, and mark center line (8), and directional arrow (9).

Identify metal strips (7) as F and G.

9.

Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip F (7).

10.

Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes in metal strip G (7).

METRIC CONVERSION

0.60 IN.

15.24 MM

1.20 IN.

30.48 MM

1.25 IN.

31.75 MM

1.40 IN.

35.56 MM

1.45 IN.

36.83 MM

METRIC CONVERSION

2.00 IN.

50.80 MM

2.50 IN.

63.50 MM

2.90 IN.

76.20 MM

3.00 IN.

35.56 MM

14.20 IN.

360.68 MM

DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES

DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES

DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES