TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 165 of 1555

TM

9-2320-387-24-2

I

1 O-77.

DEFROST CONTROL REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

Ml113

Tools

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Equipment Condition

l

Hood raised and secured (TM 9-2320-387-10).

l

Engine access cover removed (para. 10-22).

Pushnut (Appendix G, Item 313)

Maintenance Level

Lockwasher (Appendix G, Item 215)

Unit

I

a. Removal

I

1.

Remove four capscrews (2) from instrument cluster (5) and instrument panel (3).

2.

Pull instrument cluster (5) away from panel (3).

3.

Remove screw (15) from clip (10) and diverter box (12).

4.

Remove pushnut (13) and disconnect defroster cable core (11) from baMe pin (14). Discard

pushnut (13).

5.

Pull control cable (6) through firewall (9) and three clamps (7) on A-beam (8) and firewall (9).

6.

Remove nut (4) from

panel (3).

threaded shaft (1) and instrument panel (3) and pull control cable (6) through

b. Installation

1.

Feed control cable (6) through instrument panel (3) and install threaded shaft (1) on panel (3) with

nut (4).

2.

Route control cable (6) through three clamps (7) on A-beam (8) and firewall (9).

3.

Connect defroster cable core (11) on baffle pin (14) and install pushnut (13).

NOTE

Control wire and knob must be pushed in, and baffle pin must be

in the upward position before securing control cable to

diverter box.

4.

Install clip (10) on diverter box (12) with screw (15).

5.

Install instrument cluster (5) on panel (3) with four capscrews (2).

. .

lo-132