TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 290 of 1555

11-40.1. LEFT FOOTWELL OUTER ARMOR INSTALLATION

This task covers:

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive

Special Tools

Rivet tool kit (Appendix B, Item 2)

Materials/Parts

Thirty-two locknuts (Appendix G, Item 178)

Sealing compound (Appendix C, Item 72.1)

Four locknuts (Appendix G, Item 178)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-387-24-2

TM 9-2320-387-24

Equipment Condition

Driver’s footwell outer armor

removed (para. 11-40).

11-82.2

Change 1

1.

Install new driver’s side footwell outer armor (5), and spacer (6) and secure left A-beam armor (1)

with six capscrews (7). Tighten capscrews (7) to 35 lb ft. (47 N•m).

2.

Drill one 13/32 in. hole from A-pillar armor (1) through driver’s side footwell outer armor (5).

3.

Install one capscrew (2) and locknut (3) through A-pillar armor (1) and driver’s side footwell outer

armor (5). Tighten locknuts (3) to 35 lb ft. (47 N•m).

4.

Match drill 25 13/32 in. holes from A-pillar armor (1) and driver’s side footwell outer armor (5).

5.

Install 12 capscrews (2) and locknuts (3) through A-pillar armor (1) and driver’s side footwell outer

armor (5). Tighten locknuts (3) to 35 lb ft. (47 N•m).

Installation

TM 9-2320-387-24-2