TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 349 of 1555

TM 2320-387-24-2

1 l-75.

SHELTER CARRIER TAILGATE REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

1

Applicable

Models

Ml113

Tools

Personnel Required

One mechanic

One assistant

General

mechanic’s

tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

Ten locknuts (Appendix G, Item 184)

Manual References

TM 9-2320-387-24P

Maintenance Level

Unit

1

a. Removal

1

1.

Remove four 10ckn~t.s

(9), washers (2), capscrews (l), washers (2), and right and lefi side tailgate

chain brackets (10) from tailgate (8). Discard locknuts (9).

NOTE

Noti number and

location of shims prior to removal for

i&dlatiOn.

2.

Remove six

locknuts (3), washers (4), capscrews (7), tailgate (8), and shims (6) from two tailgate

mounting brackets (5). Discard locknuts (3).

b. Installation

1.

Install

shims

(6) and

tailgate (8) on two tailgate mounting brackets (5) with six capscrews (7),

washers (4), and locknuts (3). Tighten locknuts (3) to 26 lb-ft (35 Wm).

2.

Install

right

and left

side tailgate chain brackets (10) on tailgate (8) with four washers (2), cap-

screws (I), washers (2), and locknuts (9). Tighten

locknuts

(9) to 15 lb-fi (20 Nd.

11-136