TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 345 of 1555
11-71. STOWAGE PEDESTAL AND GUNNER’S PLATFORM MAINTENANCE
This task covers:
a.
Removal
b. Installation
a.1. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools:
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-1425-450-12
TM 9-1425-472-12
TM 9-2320-387-24P
Equipment Condition
• Traversing unit mount adapter removed
(TM 9-1425-450-12, TM 9-1425-472-12).
• Triple ammo box tray removed (para. 11-69).
Maintenance Level
Unit
1.
Remove eight capscrews (2), washers (3), and stowage pedestal (1) from gunner’s platform (4).
2.
Remove eight capscrews (6) and gunner’s platform (4) from floor (5).
Refer to para. 10-56 for plusnut (5.1) inspection and replacement.
1.
Apply sealing compound to threads of eight capscrews (6), and install gunner’s platform (4) on floor
(5) with capscrews (6).
2.
Apply sealing compound to threads of eight capscrews (2), and install stowage pedestal (1) on
gunner’s platform (4) with washers (3) and capscrews (2). Tighten capscrews (2) to 31 lb-ft
(42 N
•
m).
b. Installation
a.1. Inspection
a. Removal
FOLLOW-ON TASKS: • Install traversing unit mount adapter (TM 9-1425-450-12, TM 9-1425-472-12).
• Install triple ammo box tray (para. 11-69).
TM 9-2320-387-24-2
11-132
Change 1
2
1
3
6
~
5
4
5.1
Back to Top
