TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 335 of 1555

TM

9-2320-387-24-2

I

1 l-63.

INTERCOM AND BRACKETS REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL

SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

Maintenance Level

Unit

p-iczz-1

1.

Disconnect intercom cable (11) from intercom control (10).

2.

Remove two nuts (17), washers (161, capscrews (12), washers (131, and intercom control (10) from

intercom mounting bracket (6).

3.

Disconnect cable (7) from audio amplifier (8).

4.

Remove four nuts (31, washers (41, capscrews (9), washers (41, and audio amplifier (8) from intercom

mounting bracket (6).

5.

Remove two nuts (14), washers (15), capscrews (181, and washers (19) from intercom mounting

bracket (6) and radio rack support (5).

6.

Remove two nuts (201, washers (211, screws (21, and intercom mounting bracket (6) from radio rack (1).

b. Installation

1.

Install intercom mounting bracket (6) on radio rack support (5) with two washers (19),

capscrews (181, washers (151, and nuts (14).

2.

Install intercom mounting bracket (6) on radio rack (1) with two screws (2,), washers (211, and

nuts (20).

3.

Install audio amplifier (8) on intercom mounting bracket (6) with four washers (41, capscrews (91,

washers (41, and nuts (3). Connect cable (7) to audio amplifier (8).

4.

Install intercom control (10) on intercom mounting bracket (6) with two washers (13),

capscrews (12), washers (161, and nuts (17). Connect intercom cable (11) to intercom control (10).

11-122