TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 326 of 1555

TM 9-2320-387-24-2

I

1 l-59.

TURRET

HATCH PIVOT BASE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

Ml114

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

RTV sealant (Appendix C, Item 74)

Sealing compound (Appendix

C,

Item 64)

Manual References

TM 9-2320-387-24P

Maintenance Level

unit

Replacement procedures for left and right turret hatch pivot bases

are basically the same. This procedure covers the right pivot base.

Ia.Removalj

Remove two socket-head screws (11 and turret hatch pivot base (21 from turret armor (3).

b.

Installation

1.

Apply sealing compound on socket-head screws (1).

2.

Apply sealant around screw holes (41, and install turret hatch pivot base (21 on turret armor (3) with

two socket-head screws (1). Tighten socket-head screws (1) to 37 lb-ft (50 N-m).

11-113