TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 486 of 1555

TM 9-2320-387-24-2

12-68.24

Change 1

12-36.5. 10,500 LB REAR HYDRAULIC WINCH VALVE ASSEMBLY REPLACEMENT (Cont’d)

NOTE

Perform steps 3 and 4 if tube assembly was installed. Store tube

assembly in stowage box under commander's (companion) seat

inside vehicle.

3.

Disconnect tube assembly (10) from hydraulic hose assemblies (2) and

(5).

4.

Remove plugs from hydraulic hose assemblies (8) and (9).

5.

Connect hydraulic hose assemblies (2) and (5) to port 1 elbow (3) and port 3 elbow (4) on valve

assembly (1).

6.

Connect hydraulic hose assemblies (9) and (8) to port 2 adapter (6) and port 4 adapter (7) on valve

assembly (1).

10

2

5

1

2

3

4

5

1

6

7

8

9

PORT 1

PORT 3

PORT 2

PORT 4