TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 56 of 1555
TM
9-2320-387-24-2
10-23. ENGINE LEFT SPLASH SHIELD MAINTENANCE (Cont’d)
1.
Remove three locknuts (7), washers (81, capscrews (lo), and bracket (9) from left splash shield (11.
Discard locknuts (7).
2.
Remove five locknuts (61, washers (51, capscrews (131, seal retainer (121, and seal (11) from splash
shield (1). Discard locknuts (6).
NOTE
For rivet replacement instructions, refer to para. 10-56.
3.
Remove four rivets (31, support (41, and reinforcement
(2)
from splash shield (1). Discard rivets (3).
1 c. Assembly
1
1.
Install support (4) and reinforcement (2) on left splash shield (1) with four rivets (3).
2.
Install seal (11) and seal retainer (12) on splash shield (1) with five capscrews (13), washers (5), and
locknuts (6).
3.
Install bracket (9) on splash shield (1) with three capscrews (101, washers (8), and 1oFknuts
(7).
1 O-40
Back to Top
