TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 58 of 1555
TM 9-2320-387-24-2
10-24.
ENGINE RIGHT SPLASH SHIELD MAINTENANCE
This task covers:
a.
Removal
c.
Assembly
b.
Disassembly
d.
Installation
I
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
MateriaWParts
Fifteen locknuts (Appendix G, Item
116)
Seven lockwashers (Appendix G, Item 206)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment
Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance
Level
Unit
I
a. Removal
I
1.
2.
3.
4.
5.
6.
7.
8.
Disconnect
hood harness connector (331 from connector (34).
Remove
four capscrews (18), lockwashers (191, and washers (201 from plate (16) and splash shield
bracket (8). Discard lockwashers (19).
Remove two hex-head screws (111, harness (141, clamp (15), plate (161, and spring nuts (13) and (171
from headlight housing (12).
Remove four nuts (35), capscrews (36), and plate (16) from connector (34).
Remove locknut (lo), washer (91, capscrew (25), and washer (26) from splash shield (11 and
support
bracket (24). Discard locknut (10).
NOTE
Perform steps 6 and 7 for Ml113 models only.
Remove locknut (71, washers (61 and (211, capscrews (27) and (281, washers (23) and (291, and
clamp
(22) from splash
shield
(1) and airlift
bracket (5). Discard locknut (7).
Remove
locknut (30), washer (311, capscrew (21, and vent line clamp (321 from splash shield (1).
Discard locknut (30).
Remove screw (31, washer (41, and splash shield (1) from airlift bracket (5).
b. Disassembly
1.
Remove
locknut
(371, washer
(381,
capscrew (411, washer (401, and bracket (391 from splash
shield (1). Discard locknut (371.
2.
Remove three locknuts (491, washers (481, capscrews (471, and support bracket (8) from splash
shield (11. Discard locknuts (49).
3.
Remove five’locknuts (45~ washers (441, capscrews (431, seal retainer (421, and seal (46) from splash
shield (1). Discard locknuts (451.
1
O-42
Back to Top
