TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 566 of 1555

TM 9-2320-387-24-2

I

I

15-l 7. RIGHT INTAKE MANIFOLD REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General

mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Equipment Condition

l

Air horn removed (para. 3-14).

l

Intake crossover removed (para. 15-20).

l

CDR valve and bracket removed (para. 3-9).

l

Wastenate actuator removed (para. 15-19).

Intake manifold gasket (Appendix G, Item 75)

Manual References

TM 9-2320-387-24P

Maintenance

Level

Direct support

a. Removal

1.

Remove eight intake manifold studs (2) from intake manifold (I).

2.

Remove intake manifold (1) and gasket (4) from cylinder head (3). Discard gasket (4).

3.

Clean mating surfaces of cylinder head (3) and manifold (1).

b. Installation

1.

Install gasket (4) and intake manifold (1) on cylinder head (3) with eight studs (2).

2.

Tighten studs (2),

beginning

at center of intake manifold (1) and working toward

(41 N-m).

ends, to 30 lb-R

FOLLOW-ON TASKS:

l

Install wastegate actuator (para. 15-19).

l

Install CDR valve and bracket (para. 3-9).

l

Install intake crossover (para. X-20).

l

Install air horn (para. 3-14).

15-34