TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 568 of 1555

TM

9-2320-387-24-2

15 19. WASTEGATE ACTUATOR REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

hlanual References

TM 9-2320-387-24P

Equipment Condition

Rear heat shield removed (para. 3-52).

Maintenance Level

Direct support

1

a. Removal

1

1.

Remove clip (6) and actuator rod (1) from wastegate bellcrank (7).

2.

Remove two capscrews (3) from wastegate actuator (2) and wastegate housing (5).

3.

Remove capscrew (8) and wastegate actuator (2) from cylinder head (4).

b. Installation

1.

Install wastegate actuator (2) on cylinder head (4) with capscrew (8).

2.

3.

Install

Install

wastegate actuator

(2)

on wastegate housing (5) with two capscrews (3).

actuator rod (1) on wastegate bellcrank (7) with clip (6).

-

FOLLOW-ON

TASK:

Install rear heat shield (para. 3-52).

15-36