TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 587 of 1555

TM

9-2320-387-24-2

15-26. ENGINE REMOVAL

(Cont’d)

I

28.

Remove leads 17 (36),18 (421, and 91(35) from headlight assembly (37).

29.

Remove two locknuts (481, clamps (311, body harness (341, and two screws (32) from headlight

housing (33). Discard locknuts (48).

30.

Remove locknut (49) and screw (53) from bracket (51) (if equipped). Discard locknut (49).

31.

Remove two locknuts (52), screws (50), and bracket (51) (if equipped) from headlight housing (33).

Discard locknuts (52).

32.

Remove four locknuts (441, two plates (431, four screws (471, and washers (46) from headlight

housing (33) and two frame brackets (45). Discard locknuts (44).

33.

Remove two screws (411, washers (401, spacer (381, and headlight housing (33) from frame

extension (39).

._