TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 595 of 1555

TM

9-2320-387-24-2

1526.

ENGINE REMOVAL

(Cont’d)

NOTE

l

CDR valves on vehicles equipped with deep water fording kit

contain two additional vent lines.

l

Leave hoses connected to CDR valve.

62.

Loosen clamp (24) and disconnect CDR valve oil fill tube hose (23) from oil fill tube (25).

63.

Remove two nuts (22) from intake manifold studs (26).

64.

Remove two nuts (19) and CDR valve (20) with bracket (21) from valve cover studs (27) and manifold

studs (26).

65.

Remove nut (331, washer (321, capscrew (291, lockwasher (281, and clamp (30) from body (31). Discard

lockwasher (28).