TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 604 of 1555

TM 9-2320-387-24-2

15-26. ENGINE REMOVAL (Cont’d)

I

106.

Remove two capscrews (4) and upper converter housing cover (3) from transmission (11.

107.

Remove four capscrews (6) and lower converter housing cover (5) from transmission (1).

108.

Remove gaskets (2) and (7) from converter housing covers (3) and (51. Discard gaskets (2) and (71.

NOTE

l

It will be necessary to rotate flywheel clockwise from capscrew

in front of crankshaft to gain access to capscrews securing

torque converter.

l

Have assistant hold crankshaft pulley in place when removing

capscrews securing flywheel to torque converter.

109.

Remove six capscrews (9) and torque converter (8) from flywheel (10) and slide torque

converter (8) away from flywheel (10).

.

UPPER

15-72