TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 707 of 1555

TM 9-2320-387-24-2

18-4. STARTER REPAIR (Cont’d)

3.

Remove four nuts (6), lockwashers (7), and two solenoid lead connectors (8) from field and armature

terminals on starter motor frame (9) and solenoid (11). Discard lockwashers (7).

4.

Remove four capscrews (10) and solenoid (11) from starter motor frame (9).

5.

Scribe a locating mark (12) on commutator end frame (16) and starter motor frame (9).

6.

Remove four capscrews (15), commutator end frame (16), and gasket (17) from starter motor

frame (9). Discard gasket (17).

NOTE

Measure and note combined thickness of thrust washer(s) and

spacer for installation.

7.

Remove thrust washer(s) (14) and spacer (13) from armature shaft (19). Discard spacer (13) and

thrust washer(s) (14).

8.

Remove oil felt washer (18) from commutator end frame (16). Discard felt washer (18).

18-l 3