TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 714 of 1555

TM 9-2320-387-24-2

18-4. STARTER REPAIR (Cont’d)

3.

Position gasket (1) on cover (9) and connect series winding lead (5) to series winding connection (6)

with washer (4) and screw (3).

4.

Install cover (9) on solenoid housing (2) with four rubber washers (7) and nut and lockwasher

assemblies (8).

5.

Connect two brush leads (11) to field coil (12) and brush holder (15) with two screws (10).

6.

Connect two brush leads (19) to starter motor frame (13) with two washers (161, screws (171,

lockwashers (201, and nuts (21). Cover heads of screws (17) with adhesive sealant.

7.

Install two brushes (18) and two brushes (22) on brush holder (15) with four springs (14).

18-20