TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 881 of 1555

TM 9-2320-387-24-2

Change 1

25-36.5

25-13.2. 10,500 LB HYDRAULIC WINCH REPAIR (Cont'd)

8.

Remove motor end/drum support (3), drum bushing (13), and O-ring (12) from drum assembly (8).

Discard O-ring (12).

NOTE

Make sure the high lever and low lever are both in the FREE

position.

9.

Remove gear box/drum support (6) and O-ring (17) from drum assembly (8). Discard O-ring (17).

10. Remove drive shaft assembly (10) from drum assembly (8). Remove drive shaft thrust washer (9)

and O-ring (11) from drive shaft assembly (10). Discard O-ring (11).

11. Remove drum drive bushing (14), ring gear (15), and ring gear thrust washer (16) from gear

box/drum support (6).

9

10

11

12

13

3

8

14

15

16

17

6