TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 929 of 1555

TM

9-2320-387-24-2

1 2519.

A/C CONDENSER

FAN AND SHROUD REPLACEMENT

I

This task covers:

a.

Removal

b.

installation

INITIAL SETUP:

Applicable

Models

Ml114

Tools

Manual References

TM 9-2320-387-24B

Equipment

Condition

General mechanic’s tool kit:

A/C condenser removed (para. 25-W

automotive (Appendix B, Item 1)

Maintenance

Level

Direct

support

pxizq

1.

Remove five capscrews (8) from shroud (9) and A/C condenser (10).

2.

Remove four nuts (17), capscrews (11, capscrews (5), and fan (4) from shroud (9) and

AK

condenser (10).

3.

Remove eight nuts (6), capscrews (111, and fan (7) from shroud (9).

4.

Remove four nuts (21, capscrews (3), and brackets (18) from fan (4).

5.

Remove six capscrews (12) and bracket (13) from A/C condenser (10).

6.

Loosen clamp (15) and remove drain hose (16) from condenser tray (141.

71

1.

Install bracket (13) on A/C condenser (10) with six capscrews (12).

2.

Install four brackets (18) on fan (4) with four capscrews (3) and nuts (2).

3.

Install fan (7) on shroud (9) with eight capscrews (11) and nuts (6).

4.

Install fan (4) on shroud (9) with four capscrews (5).

5.

Secure fan (4) to A/C condenser (10) with four capscrews (1) and nuts (17).

6.

Install shroud (9) on NC condenser (10) with five screws (8).

7.

Install drain hose (16) on condenser tray (14) and tighten clamp (15).

25-54