TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 290 of 1072
CONNECT REMOTE CONTROL UNIT TO FORWARD OUTLET - Continued
WARNING
Ensure ON/OFF/MHC-SHUTDOWN power switch is in OFF position prior
to connecting REMOTE CONTROL UNIT. Failure to comply may result
in injury or death to personnel.
4.
Set ON/OFF MHC-SHUTDOWN power switch (7) on REMOTE CONTROL UNIT (8)
to OFF position.
5.
Connect cable plug (6) to REMOTE CONTROL CONNECTOR outlet (4).
6.
Set ON/OFF POWER switch (1) on electric control box (2) to ON position.
7.
Set ON/OFF MHC-SHUTDOWN power switch (7) on REMOTE CONTROL UNIT (8)
to ON position.
8.
Operate crane.
ROTATE AND TELESCOPE BOOM
WARNING
•
When using crane on any vehicle, park vehicle clear of all overhead
electrical lines. Keep boom clear of all electrical lines and other
obstacles while operating crane. Failure to comply may result in injury
or death to personnel.
•
Ensure area is clear of personnel prior to moving SWING control
lever. Boom should be swung slowly enough so crane operator has
complete control. If operator cannot see load during operation,
operate crane from REMOTE CONTROL UNIT. Failure to comply
may result in injury or death to personnel.
•
Operator must keep control of load at all times. If necessary, attach
cargo tie downs to load for control. Failure to comply may result in
injury or death to personnel.
•
If electrical power fails during crane operation, move switch on
REMOTE CONTROL UNIT to SHUTDOWN position. Failure to
comply may result in injury or death to personnel.
TM 9-2320-428-10
0043
0043-6
Back to Top
