TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 293 of 1072
RAISE AND LOWER LOAD
WARNING
•
When using crane on any vehicle, park vehicle clear of all overhead
electrical lines. Keep boom clear of all electrical lines and other
obstacles while operating crane. Failure to comply may result in injury
or death to personnel.
•
Ensure area is clear of personnel prior to moving SWING control
lever. Boom should be swung slowly enough so crane operator has
complete control. If operator cannot see load during operation,
operate crane from REMOTE CONTROL UNIT. Failure to comply
may result in injury or death to personnel.
•
Operator must keep control of load at all times. If necessary, attach
cargo tie downs to load for control. Failure to comply may result in
injury or death to personnel.
•
If electrical power fails during crane operation, move switch on
REMOTE CONTROL UNIT to SHUTDOWN position. Failure to
comply may result in injury or death to personnel.
CAUTION
•
Do not let cable become slack. Cable may get tangled in drum and
damage equipment.
•
Do not drag load sideways on ground. Dragging load could cause
damage to equipment.
1.
Operate SWING control lever (1) to center end of boom (2) directly over load.
TM 9-2320-428-10
0043
0043-9
Back to Top
