TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

  TM-9-2320-428-10 - Page 488 of 1072

CONNECT TOW BAR - Continued
(21). If disabled vehicle is an A4 model HEMTT series vehicle (refer
to data plate on inside of drivers door), skip to Step (22).
21.
Route one 16 ft. (5 m) safety chain (20) over walking beam (21) behind No. 1 axle
(22) on disabled vehicle, and hook 16 ft. (5 m) safety chain (20) back into itself under
walking beam (21) as shown.
22
21
20
BASE/A2 MODELS
Figure 6.
CAUTION
Special care should be taken when connecting 16 ft. (5 m) safety chain
to tie down ring. The procedure listed below routes the 16 ft. (5 m) safety
chain in such a way as to minimize excessive contact with vehicle air
suspension air springs during towing. Failure to comply may result in
damage to equipment.
TM 9-2320-428-10
0090
0090-8


Back to Top