TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 75 of 1072
OPERATOR MAINTENANCE
INTRODUCTION
SCOPE
This manual is used for operation and operator-performed maintenance of HEMTT series
vehicles which consist of a number of different models all built on similar chassis, but
specially equipped to perform different missions.
Table 1.
Overview.
M977 CARGO
DESCRIPTION
Figure 1.
Cargo vehicle with 62,000 lbs (28 148 kg) GVWR and
100,000 lbs (45 400 kg) GCWR. Vehicle has an 18 ft. (5.5
m) cargo body and is equipped with a material handling
crane which has a maximum load capacity of 2500 lbs (1 135
kg) at 19 ft. (5.8 m) boom radius.
MAINTENANCE FORMS AND RECORDS
Department of the Army forms and procedures used for equipment maintenance will be
those prescribed by DA PAM 750-8 The Army Maintenance Management System (TAMMS)
Users Manual. (WP 0161)
EQUIPMENT IMPROVEMENT REPORT AND MAINTENANCE DIGEST (EIR MD) AND
QUALITY DEFICIENCY REPORTING (QDR).
The quarterly TB 43-0001-62 (series) Equipment Improvement Report and Maintenance
Digest (WP 0161) contains valuable field information on equipment covered in this manual.
Information in the TB 43-0001-62 (series) Equipment Improvement Report and
Maintenance Digest (WP 0161) is compiled from some of the Equipment Improvement
Reports (EIR) that have been prepared on vehicles covered in this manual. Many of these
articles result from comments, suggestions, and improvement recommendations that were
submitted to the EIR program. TB 43-0001-62 (series) Equipment Improvement Report and
TM 9-2320-428-10
0001
0001-1
Back to Top
