TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 77 of 1072
CORROSION PREVENTION AND CONTROL - Continued
If a corrosion problem is identified, it can be reported using SF 368 (WP 0161). The use of
key words, such as "corrosion", "rust", "deterioration", and "cracking" will ensure that the
information is identified as a CPC problem.
DESTRUCTION OF ARMY MATERIAL TO PREVENT ENEMY USE
Procedures for the destruction of Army materiel to prevent enemy use are contained in TM
750-244-6 (WP 0161).
PREPARATION FOR STORAGE OR SHIPMENT
See information on preparing the HEMTT series vehicle for storage or shipment.
WARRANTY INFORMATION
The HEMTT series vehicles are warranted by Oshkosh Truck Corporation for 12 months or
12,000 miles (19 308 km), whichever comes first. The warranty starts on the date found in
block 23 of DA Form 2408-9 (WP 0161) in the vehicle logbook. Report all defects in material
or workmanship to the supervisor, who will take appropriate action through the field level
maintenance shop.
NOMENCLATURE CROSS-REFERENCE LIST
Table 2.
Common Nomenclature.
COMMON NAME
OFFICIAL NOMENCLATURE
Brake Pedal
Service Brake Pedal
Cable/Hoist Cable
Wire Rope
Cold Start System
Ether Quick-Start System
Electrical Control Box
Junction Box
Engine Coolant
Antifreeze, Ethylene Glycol Mixture
Glad Hand
Quick Disconnect Coupling
High Idle Switch
Engine Speed Control Switch
Jake Brake, Jacobs® Brake
Engine Retarder, Engine Brake
TM 9-2320-428-10
0001
0001-3
Back to Top
