TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 1018 of 1244

PREPARE CRANE FOR OPERATION - Continued

NOTE

•

Failure of hydraulic system will stop crane operation and lock crane

in place. If hydraulic system fails during crane operation, refer to

perform immediate action for loss of hydraulic system. (WP 0133)

•

If electrical system fails during crane operation, refer to perform

emergency hydraulic operation when grove crane electrical power

fails. (WP 0134)

1.

Lower rear beacon lights to stowed position. (WP 0096)

2.

Start engine. (WP 0044)

NOTE

Grove crane can operate on up to 5 degree side slope.

3.

Position vehicle on level ground so all loading and unloading can be done from one

position.

4.

Set transmission range selector (1) to N (neutral).

5.

Pull out PARKING BRAKE control (2).

2

1

4

3

TRAILER

AIR SUPPLY

UST

Figure 1.

6.

Set PTO ENGAGE switch (3) to ON position. Indicator light (4) will illuminate.

TM 9-2320-431-10-1

0106

0106-2