TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 1131 of 1244

WINCH MIRED VEHICLE FORWARD - Continued

WARNING

Keep all personnel clear of area near winch cable when tension is on

cable. Failure to comply may result in injury or death to personnel.

69.

Order all personnel to stand clear of area near winch (10).

CAUTION

Do not reel in winch cable too tightly. If too much tension is applied, cable

or tie down ring can break, or winch may be damaged.

70.

Once assistant and all other personnel are clear of area, move winch shift lever (4) to

IN and take all slack out of winch cable (9).

71.

When winch cable (9) is tight, release winch shift lever (4) to center position.

72.

Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.

73.

Shut off engine. (WP 0057)

74.

Adjust mirror (1) for driving.