TM-9-2320-431-10-1
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2
JUNE 2009
TM-9-2320-431-10-1 - Page 1135 of 1244
OPERATOR MAINTENANCE
CONNECT/DISCONNECT SELF-RECOVERY WINCH CABLE TO ANOTHER VEHICLE
INITIAL SETUP:
Not Applicable
CONNECT CABLE TO VEHICLE
CAUTION
When attaching self-recovery winch cable to another vehicle, that vehicle
must be used only as an anchor point or damage to equipment can result.
NOTE
There are three tie down rings on each side of vehicle.
1.
Unscrew one tie down ring (1) from mounting plate (2).
Back to Top
