TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 376 of 1244

HOOKUP - Continued

42

47

Figure 20.

CAUTION

When lifting and towing an A4 HEMTT series vehicle (refer to data plate

on inside of drivers side door) special care must be taken to avoid causing

damage to the vehicle air suspension system. Always turn No. 1 axle

(front lift only) air suspension ball valves OFF prior to lifting the A4 HEMTT

series vehicle (refer to "operate air suspension ball valves" in HEMTT A4

operator's manual for more information). Failure to comply may result in

damage to equipment.

NOTE

•

If disabled vehicle is A4 HEMTT series vehicle (refer to data plate on

inside of driver side door), complete Step (29).

•

If disabled vehicle is BASE or A2 HEMTT series vehicle (refer to data

plate on inside of driver side door), skip to Step (29).

28.

Position disabled vehicle No. 1 axle driver side (shown) and passenger side ball valve

handles (48) OFF (refer to "operate air suspension ball valves" in HEMTT A4

operator's manual for more information).

TM 9-2320-431-10-1

0060

0060-16