DISCONNECT - Continued
NOTE
After lowering disabled vehicle, extend lift and tow cylinders
approximately 2 to 4 in. (50 to 100 mm) to allow for adjustment when
removing adapters.
4.
Prepare retrieval system for operation (WP 0059) and pull LIFT CYLINDER control
lever (4) and lower disabled vehicle to ground.
4
Figure 27.
WARNING
If disabled vehicle's parking brake is inoperative, chock wheels of
disabled vehicle (refer to operator's manual). Failure to comply may result
in injury or death to personnel.
5.
Pull out PARKING BRAKE control (5) on disabled vehicle.
TM 9-2320-431-10-1
0060
0060-23