TM-9-2320-431-10-1
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2
JUNE 2009
TM-9-2320-431-10-1 - Page 406 of 1244
HOOKUP - Continued
WARNING
Steering axles must be turned straight forward or disabled vehicle will not
track properly. Failure to comply may result in injury or death to personnel.
WARNING
Driveshafts can weigh up to 100 lbs (45 kg). Properly support driveshafts
when removing screws. After screws and brackets are removed,
driveshaft can fall. Failure to comply may result in injury or death to
personnel.
NOTE
•
To remove driveshaft screw, use wrench located in PLS BII storage
box.
•
Both PLS No. 3 axle driveshaft ends are removed the same way.
32.
Support No. 3 axle driveshaft (43) while assistant removes eight screws (44) and four
brackets (45).
TM 9-2320-431-10-1
0061
0061-14
Back to Top
