TM-9-2320-431-10-2

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2

JUNE 2009

TM-9-2320-431-10-2 - Page 189 of 712

OPERATOR MAINTENANCE

HOIST WILL NOT LIFT LOAD

INITIAL SETUP:

Equipment Condition

Vehicle setup for crane operations.

(Volume 1, WP 0106)

TROUBLESHOOTING PROCEDURE

HOIST WILL NOT LIFT LOAD

TEST 1 - Is load within allowable limits?

NOTE

Common problems that crane operators may see are:

1. Slow or abnormal operation.

2. Crane will not pick up load.

Common causes of problems are:

1. Cold hydraulic oil (slow operation).

2. Low engine speed (slow or abnormal operation).

3. Operating two craning functions at the same time (slow operation).

4. Load too heavy (will not pick up load).

5. Air in cylinder or hoist motor (abnormal operation).

Report all problems to field level maintenance.

1.

Check that load is not over load limit. If load is found to be over-limit, reduce weight

to below load limit.

TM 9-2320-431-10-2

0162

0162-1