TM-9-2320-431-10-2
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2
JUNE 2009
TM-9-2320-431-10-2 - Page 474 of 712
Table 1.
PMCS - WEEKLY - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
POWER
SWITCH
LATCH
SWITCH
HIGH IDLE
CONTROL SWITCH
ON/OFF POWER SWITCH
Figure 28.
d. Set HIGH IDLE CONTROL
switch to CONTINUOUS.
WARNING
Excessive noise levels are
present any time the heavy-
duty winch, crane, or retrieval
system is operating. Wear
single hearing protection
(earplugs or equivalent) while
working around equipment
when it is running. Failure to
comply may result in injury or
death to personnel. Seek
TM 9-2320-431-10-2
0185
0185-40
Back to Top
