TM-9-2320-431-10-2

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2

JUNE 2009

TM-9-2320-431-10-2 - Page 609 of 712

INSTALL WHEEL AND TIRE ASSEMBLY - Continued

2.

Make sure deep side of spare wheel and tire assembly wheel dish (3) is in same

position as flat/shredded wheel and tire assembly wheel dish when flat/shredded

wheel and tire assembly was removed.

NOTE

•

Tire valve stem extension must be removed to reposition wheel and

tire assembly valve stem extension.

•

It may be necessary to reposition valve stem to accomplish

installation of valve stem extension.

3.

Make sure wheel and tire assembly valve stem (4) is pointing out, away from vehicle.

4

SHALLOW DISH OUT

DEEP DISH OUT

Figure 13.

4.

Line up holes in rim (5) of wheel and tire assembly (1) with studs (6) on axle (2).

TM 9-2320-431-10-2

0192

0192-11