TM-9-2320-432-10
TRUCK, CARGO, 8X8, M985
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-432-10 - Page 907 of 1076
Table 1.
PMCS - WEEKLY - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
•
Do not let cable become
slack or cable may get
tangled on drum.
NOTE
•
TELESCOPE and HOIST
levers should be
operated at the same
time.
•
Crane movement from
one lever may be slower
than the other when
operating two levers
together.
(5) Move TELESCOPE
control lever to OUT
position while moving
HOIST control lever to
DOWN position to pay
out cable.
Extensions
will not
come out, or
cable will
not pay out.
(6) Move HOIST control
lever in UP position to
reel in cable.
Cable will
not reel in.
(7) Check that crane and
ENGINE HIGH IDLE do
not operate when
REMOTE CONTROL
UNIT is in MHC-
SHUTDOWN position.
Notify organizational
maintenance if crane
and ENGINE HIGH IDLE
Crane will
operate and
engine
speed will
increase to
1500 rpm.
TM 9-2320-432-10
0148
0148-51
Back to Top
