TM-9-2320-433-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-433-10 - Page 288 of 964

STOW OUTRIGGERS - Continued

NOTE

Outrigger control handles may not easily engage "up" position due to

buildup of dirt, paint, etc. If this is the case, clean and lubricate area (if

possible) and/or work control handle back and forth several times to work

obstruction out.

2.

Turn control handle (3) until it aligns with the up arrow (4).

NOTE

Boom extension control lever should be used to add extra power for

moving outrigger legs up or down.

3.

Push boom extension control lever (5) downward until outrigger leg (6) is fully

retracted.

NOTE

•

If outrigger leg fails to retract, repeat Steps (1) through (3).

•

It may be necessary to forcibly remove outrigger pad from outrigger

leg end-ball.

4.

Repeat Steps (1) through (3) for driver side outrigger leg.

NOTE

Outrigger pads are stowed in the same manner, passenger side shown.

5.

Install outrigger pad retaining pin (1) in hole in outrigger pad socket (2).

TM 9-2320-433-10

0040

0040-54