TM-9-2320-433-10
TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-433-10 - Page 291 of 964
STOW OUTRIGGERS - Continued
WARNING
Failure to hold outrigger leg may cause leg to rotate and fall, resulting in
injury to personnel.
9.
While holding outrigger leg (6), remove outrigger leg pin (11); then rotate outrigger
leg (6) to up position.
10.
While holding outrigger leg (6), replace outrigger leg pin (11) and retainer lock (10) to
secure outrigger leg (6) in up position.
11.
Remove outrigger beam retainer lock (12) and outrigger beam pin (13).
12.
Push outrigger beam (14) in until it stops.
13.
Install outrigger beam pin (13) and outrigger beam retainer lock (12).
14.
Repeat Steps (8) through (13) for driver side outrigger.
SHUT DOWN CRANE AND VEHICLE
CAUTION
Operator should be aware crane offers no interlocks to protect equipment
from damage in the event crane controls are moved while the crane is
folded. Never move crane controls other than those called out while the
crane is not in operating position. Failure to comply may result in damage
to equipment.
1.
Set ENGINE HIGH IDLE ON/OFF switch (1) to OFF position.
TM 9-2320-433-10
0040
0040-57
Back to Top
